COMPLETE Stock Tank Hot Tub Plumbing Kit – Just add a Tank and Pipe! (Heating & Filtration Only No jets)

This is a Complete DIY Plumbing Kit to help you build your own Stock Tank Hot Tub.

This plumbing kit will enable you to add hot water returns and lower drains (you need 2 for safety and to maintain water flow to your pump) to your Stock Tank to begin to turn this into a Soaking Tub. Connect to your pump, filter, spa pack heater (and controls) and you have a fully functional stock tank tub. The kit will rival something that will cost 4 or 5 times the total cost of your stock tank build!

Parts will require assembly and some DIY skills. You will need to purchase PVC Pipe & Cement from your local pool supplier.

Holes for the returns need to be cut from the stock tank at 65mm or 2.56″ with a suitable hole cutter

Holes for the drains need to be cut from the stock tank at 85mm or 3.35″ with a suitable hole cutter

Main Parts Explanation

4KW Balboa Spa Pack

Included with this kit, is the latest Balboa 4KW electric spa heater and control unit, complete with topside controls. This allows you to control your stock tank hot tub’s heater, pump, jets and air blower. This unit is found in regular plastic shell hot tubs that can cost upwards of $10K!

Single Speed 0.25HP Pump

A single speed 0.25HP pump takes care of your stock tank’s circulation. It will filter and heat your tank. Please note, the image of the actual pump supplied may vary.

25sqft Filter

Included is a cartridge filter which you will use to filter your water in the stock tank hot tub. No need to keep emptying and refilling. This setup is exactly the same as you find on hot tubs costing upwards of $7K!

Full Kit Contents

This Kit Contains

Complete Hot Tub DIY Guide (Download a Sample here)

0.25HP Single Speed Pump
Balboa 4KW Spa Pack
25 SQ FT Filter
2 x Directional Returns
2 x Jet Body (Please note, these are for the returns, the air lines will not be used and plugs/end caps will block them up)
2 x Gasket
2 x Lower Drain
3 x 90 Degree 2″ Coupler
1 x 2″ T Coupler
5 x 90 Degree 1″ Coupler
8 x End Caps
1 x Pump Cable
2 x Pump Unions
2 x Gate Valves
1 x 2″ to 1″ Reducer

And of course, I am on hand should you have any questions about the assembly of the kit. Always happy to help.

***Please Note***– as supply chains continue to be disrupted, should any of the advertized products or parts be unavailable, I will contact you before shipping to offer an equal of better specification of part. European standard is 3KW for the Spa Pack.