The only place for Hot Tub CAD and Plumbing Diagrams on the Internet!

COMPLETE Stock Tank Hot Tub Plumbing Kit – Just add a Tank and Pipe! (8 Jets)


This is a complete kit to enable you to build your Stock Tank Hot Tub – you just need to add your own tank and 1″ and 2″ pipe!

PVC pipe is available at all good hardware stores. Pipe is expensive to ship (as it is heavy) so to keep the cost down, purchasing it locally is the best option. You will need approximately 10′ of 2″ PVC and 60-75′ of 1″ PVC pipe.

Don’t forget to buy Pipe cement too! I am not able to ship the pipe cement as it is a chemical.

Price includes Delivery

Please note, this kit does not include a Stock Tank or PVC Pipe.

For electricity requirements, you will need 230V 60HZ supply. You can read a full article here about the electricity requirements. This will not work off 115V, hot tubs all run on 230V.





Add to wishlistAdded to wishlistRemoved from wishlist 1
Add to compare

This is a Complete DIY Plumbing Kit to help you build your own Stock Tank Hot Tub.

This plumbing kit will enable you to add jets and lower drains (you need 2 for safety and to maintain water flow to your pump) to your Stock Tank to begin to turn this into a Hot Tub. Connect to your pump, filter, spa pack heater (and controls) and blower and you have a fully functional stock tank hot tub. The kit will rival something that will cost 4 or 5 times the total cost of your stock tank build!

Parts will require assembly and some DIY skills. You will need to purchase PVC Pipe & Cement from your local pool supplier.

Holes for the jets need to be cut from the stock tank at 65mm or 2.56″ with a suitable hole cutter

Holes for the drains need to be cut from the stock tank at 85mm or 3.35″ with a suitable hole cutter

Main Parts Explanation

Balboa Spa Pack

4KW Balboa Spa Pack

Included with this kit, is the latest Balboa 4KW electric spa heater and control unit, complete with topside controls. This allows you to control your stock tank hot tub’s heater, pump, jets and air blower. This unit is found in regular plastic shell hot tubs that can cost upwards of $10K!

Air Blower

Air Blower

The air blower adds “bubbles” to your stock tank hot tub and increases the power of the jets. Please note, the image of the actual blower supplied may vary.

Dual Speed 2HP Pump

2HP Pump

A dual speed 2HP pump takes care of your stock tank’s circulation as well as jets. At low speed it will filter and heat your tank and at high speed you can enjoy the jets a plenty. Please note, the image of the actual pump supplied may vary.

25sqft Filter


Included is a cartridge filter which you will use to filter your water in the stock tank hot tub. No need to keep emptying and refilling. This setup is exactly the same as you find on hot tubs costing upwards of $7K!

Full Kit Contents

This Kit Contains

Complete Hot Tub DIY Guide (Download a Sample here)

2HP Dual Speed Pump
Balboa 4KW Spa Pack
25 SQ FT Filter
Air Blower
8 x Jets
8 x Jet Body
8 x Gasket
2 x Lower Drain
90 Degree 2″ Coupler
5 x 2″ T Coupler
5 x 90 Degree 1″ Coupler
8 x End Caps
1 x Air Check Valve
1 x Pump Cable
2 x Pump 2″ Unions
2 x Gate Valves

And of course, I am on hand should you have any questions about the assembly of the kit. Always happy to help.


***Please Note***– as supply chains continue to be disrupted, should any of the advertized products or parts be unavailable, I will contact you before shipping to offer an equal of better specification of part.

COMPLETE Stock Tank Hot Tub Plumbing Kit – Just add a Tank and Pipe! (8 Jets)
COMPLETE Stock Tank Hot Tub Plumbing Kit – Just add a Tank and Pipe! (8 Jets)


Select your currency
DIY Hot Tub, Plunge Pool CAD and Design Packages
Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart