The only place for Hot Tub CAD and Plumbing Diagrams on the Internet!

Plunge Pool / Cocktail Pool – 10′ x 7′ plus Architectural

Add your review

$199.00

You are purchasing the design, plumbing design, tips and tricks plus the ultimate How to DIY Guide to build a Plunge Pool or Cocktail Pool – 10′ x 7′ plus the Architectural drawings (side elevation and plan view). The Architectural PDF drawings can be used to submit to your local planning department if you need a permit to build your cocktail or plunge pool. This will save you a whole bunch of money from having to get your own Architect to draw them up for you.

No DIYer wants to embark on a project that continues to cost money. Nobody wants to just “throw money down the toilet” but that is what happens if you start a DIY Plunge Pool project without the correct plan.

I am putting an end to the waste, frustration and uncertainly of building a DIY Plunge Pool.

I’ve been there before – when I built my own I was wasting $100s of dollars through making mistakes. Now, I am helping people avoid the costly mistakes that I made.

Don’t just start a Plunge Pool project and hope, start a Plunge Pool project and KNOW it is going to work!

This is where I com in. I am offering all of my knowledge of Plunge Pool building, plumbing and designing into one package to help YOU.

✔️ Remove Stress & Guesswork
✔️ Avoid Costly Mistakes
✔️ Get access to proven designs

The pool itself has been designed so that it is nice and simple for the DIYer to build. Everything that you need to know about building a plunge pools is in this guide.

There is a lounger area as well as steps down into the pool. How good will this be relaxing in your backyard? The plumbing is straight forward and very well documented in the DIY guide.

The design is not set in stone. You can of course modify the dimensions and the seating as you wish. You can see from some of the pictures on the left hand side how this design can be modified by you the DIYer.

The design makes use of an Electric Heater. However, if you want to go down the Propane, NG or Air Source Heat Pump, there is a section in the guide that tells you how to do that too.

Looking to include a UV or Salt Chlorination System? There is a section for that too!

Pool builders will charge in excess of $30K to build you one of these. You should be able to comfortably do it under $10K. Less if you opt for a painted finish rather than tiles and you do it yourself without contractors.

When you are embarking on a DIY project, having the right plans to start your project is so important. This package is exactly what you need. It will save you more than the price of it by avoiding costly mistakes.

I am able to supply you all the plumbing parts that you need for this project.

Download a sample of the guide so you can see exactly what you are getting.

There are no upsells, no sales funnels, the price you see is exactly what you will pay.

If you need an architectural drawing to submit for planning permission, then this package is not for you. You need this one!

This is a PDF Diagram Only (multiple images and multiple angles) It is not a 3D CAD File.

 

$199.00

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

You are purchasing the design, plumbing design, tips and tricks plus the ultimate How to DIY Guide to build a Plunge Pool or Cocktail Pool – 10′ x 7′ plus the Architectural drawings (side elevation and plan view). The Architectural PDF drawings can be used to submit to your local planning department if you need a permit to build your cocktail or plunge pool. This will save you a whole bunch of money from having to get your own Architect to draw them up for you.

No DIYer wants to embark on a project that continues to cost money. Nobody wants to just “throw money down the toilet” but that is what happens if you start a DIY Plunge Pool project without the correct plan.

I am putting an end to the waste, frustration and uncertainly of building a DIY Plunge Pool.

I’ve been there before – when I built my own I was wasting $100s of dollars through making mistakes. Now, I am helping people avoid the costly mistakes that I made.

Don’t just start a Plunge Pool project and hope, start a Plunge Pool project and KNOW it is going to work!

This is where I com in. I am offering all of my knowledge of Plunge Pool building, plumbing and designing into one package to help YOU.

✔️ Remove Stress & Guesswork
✔️ Avoid Costly Mistakes
✔️ Get access to proven designs

The pool itself has been designed so that it is nice and simple for the DIYer to build. Everything that you need to know about building a plunge pools is in this guide.

There is a lounger area as well as steps down into the pool. How good will this be relaxing in your backyard? The plumbing is straight forward and very well documented in the DIY guide.

The design is not set in stone. You can of course modify the dimensions and the seating as you wish. You can see from some of the pictures on the left hand side how this design can be modified by you the DIYer.

Pool builders will charge in excess of $30K to build you one of these. You should be able to comfortably do it under $10K. Less if you opt for a painted finish rather than tiles and you do it yourself without contractors.

The design makes use of an Electric Heater. However, if you want to go down the Propane, NG or Air Source Heat Pump, there is a section in the guide that tells you how to do that too.

Looking to include a UV or Salt Chlorination System? There is a section for that too!

When you are embarking on a DIY project, having the right plans to start your project is so important. This package is exactly what you need. It will save you more than the price of it by avoiding costly mistakes.

I am able to supply you all the plumbing parts that you need for this project.

Download a sample of the guide so you can see exactly what you are getting. With the download you will also get a dimensional drawing document.

There are no upsells, no sales funnels, the price you see is exactly what you will pay.

If you need an architectural drawing to submit for planning permission, then this package is not for you. You need this one!

This is a PDF Diagram Only (multiple images and multiple angles) It is not a 3D CAD File.

 

 

Videos: Plunge Pool / Cocktail Pool – 10′ x 7′ plus Architectural

Plunge Pool / Cocktail Pool – 10′ x 7′ plus Architectural
Plunge Pool / Cocktail Pool – 10′ x 7′ plus Architectural

$199.00

Select your currency
EUREuro
DIY Hot Tub, Plunge Pool CAD and Design Packages
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0
Shopping cart