Custom Hot Tub & Pool (Combo) Design Consultancy

This is the process that most of the case studies on the website have followed.

Building a custom designed hot tub and pool combo can be a daunting process. The whole rationale behind this website has been that when I built my own tub, I just couldn’t find the information that I needed.

I vowed that when I had finished my own custom designed hot tub, I was going to put all the information together into a website to help others. That is exactly what I have done here.

Now, I am helping people just like you with their own custom designs.

What is the custom designed hot tub and pool combo process?

After you have ordered the consulting, all custom designs start with a rough sketch. This is the first thing that I would need from you.

The sketch will cover the size and layout that you are looking for. At this point, I will also need to know how you are going to build your tub and pool combo. Poured concrete or block built?

This is also the time to tell me about any water features you are looking for. How many jets you are thinking in the tub and if there is anything else that you have on your mind that would be pertinent to the design.

What about the control room?

If you have had a read around the website, or watched any of my videos on my YouTube Channel, then you will know that the control room is kind of key.

I am not going to go through the whole process in this article as I already have an in depth article here about the control room. However, I will need to know if it is above or below the water line and also how far it is going to be away from the hot tub.

The pool will take care of itself in terms of pumps and filters, but the hot tub side of things kis key as this will dictate the type of pumps needed as well as working out the size of pump after a calculation of head height has been done.

Photos or Video of the proposed site for your custom designed Hot Tub & Pool Combo

Accompanying your sketches of the custom designs with a video of the proposed location and also some phots is a great idea.

This gives me plenty of insight to where you are planning the build and how it should look and fit in with the location.

I can also help to spot any potential problems with the site too.

Time for a Google Form

What we do here is that I send you a link to the Google Form that I have created. This puts all the the main information about your design into one place. From there, it is then onto the modelling stage.

3D Modelling of your Custom Designed Hot Tub & Pool Combo

The 3D model really helps your ideas come alive. This is an interactive process so you get lots of email or WhatsApps from me with screen grabs and casts of the design. We take this back and forth as many times as is needed to get this complete.

Once you have “signed off” on the 3D model, it is then time to add the plumbing to the model.

Plumbing layout of your Custom Design

The plumbing design is less of an “interactive” process as really most of the plumbing is set by rules and precedent.

What the 3D plumbing layout does for you is give you a way to visualise and see exactly what is going to fit where within the design.

Understanding how the whole thing works is really important and the 3D plumbing layout will certainly help you do that.

Architectural CAD

Once we have the 3D layout and the plumbing, then the design goes off to the CAD/Structural engineers to then produce the dimensional architectural drawing.

If you are using a general building contractor then this is the drawing that they will be looking for. They don’t want to trawl through a 6000 word document, they want a single page to show them what they should be building.

Documentation and Parts Quotation

The final stage of the process is to put together the documentation for your project. This includes around 6000 words explaining everything to sealing concrete to insulation.

This is a document that I have built up over the last few years and really delves into the depths of all things DIY hot tubs and pools. If it is not in there, it is probably not needed. Bold statement? Perhaps, but this is a tried and tested document and has been used to build literally hundreds of tubs.

If there is something missing, then let me know and I will certainly add it. Having the best and most comprehensive documentation is important to me.

The Process In a Nutshell

1. Order Consulting Online and send through a rough sketch of the tub with external dimensions
2. Details of any features eg water falls that you are looking for
3. Position of the control room
4. Photos and video of the site
5. Google Form Completion
6. 3D modelling of the project
7. Plumbing Layout
8. Architectural CAD
9. Comprehensive documentation
10. Parts Quotation