You’ve got the vessel. Now let’s get the plumbing right.

You don’t always need a full design consultancy. Sometimes the structure is already there — you’ve built your tub, inherited one, or picked up a project that stalled — and what you need is someone who knows hot tub plumbing inside out to help you get it done.

That’s exactly what this is.

A dedicated plumbing consultancy for your hot tub or pool build. I’ll review your setup, put together a 3D plumbing schematic for you to follow, spec all the parts you need, and support you through to completion.

Over 1,500 custom hot tub and pool builds completed worldwide.

Across the USA, UK, Europe, Australia and beyond.

Who Is This For?

This consultancy is designed for builders at a specific point in their project — the vessel exists, but the plumbing needs to be planned, designed, and executed correctly. Here are the most common situations:

You’ve built a block or concrete tub and got stuck on the plumbing

The structure is done. The shell is ready. But now you’re staring at it wondering where to start with jets, pumps, heaters, and pipe runs. This is one of the most common situations I help with — and it’s a very solvable problem with the right plan in place.

You’ve inherited or bought a hot tub that needs replumbing

Maybe you picked up a cheap tub on eBay. Maybe you bought a house with an old one in the garden. The shell is fine but the plumbing is shot, outdated, or completely missing. I’ll assess what you have, design the new plumbing layout, and get you a quote for everything you need.

A contractor left your project unfinished

It happens. A builder got halfway through and moved on, or the relationship broke down. Now you’ve got a half-finished project and no clear plan for what comes next. I’ll assess where things stand, put together a proper plumbing plan, and help you get the project back on track.

You want expert eyes on your plumbing before you commit

You’ve done your research, you have a rough plan in mind, but you want someone experienced to check your thinking before you start cutting holes and glueing pipe. A second opinion from someone who has seen hundreds of builds is worth far more than the cost of getting it wrong.

What You Get

Assessment of Your Setup

You send me photos and details of your vessel, its dimensions, the proposed control room position, and anything else relevant to the build. I’ll review everything before we start planning.

3D Plumbing Schematic

I produce a 3D parts diagram showing the complete plumbing layout for your hot tub or pool — jet positions, pipe runs, pump and heater placement, valve positions, everything. This is a clear visual plan you can follow yourself or hand to a plumber.

Full Parts Specification & Quotation

Once the plumbing layout is agreed, I put together a complete parts list with everything you need — correctly specced for your exact setup. No guessing, no overbuying, no missing a critical fitting halfway through the job. Parts can be ordered directly via parts4tubs.com (USA) or parts4tubs.co.uk (UK).

Ongoing Support Through to Completion

This isn’t a one-and-done document drop. I’m available via email throughout your build to answer questions, review photos, and help you work through anything that comes up. The consultancy doesn’t expire — it runs until your build is done.

What’s Not Covered

To be clear about scope — this consultancy covers the plumbing design and support for an existing vessel. It does not include:

Structural design or engineering of the vessel itself
Architectural CAD drawings
Design of the hot tub or pool shell

If you need structural design and full architectural drawings as well as plumbing, the Custom Design Consultancy is the right product. If you’re building a hot tub and pool together, the Combo Consultancy covers both.

What Customers Say (Not made up, these all have multiple videos on my YouTube Channel)

“The control room planning alone saved me from a really expensive mistake. I had it in the wrong position. Andi spotted it immediately.”

— Richie, Texas

“The documentation is incredible. I referred back to it constantly throughout the build. Nothing was left unanswered.”

— Mark, Kansas

Frequently Asked Questions

How do we communicate?

Primarily via email, with photos and video shared as needed. I’m responsive and you won’t be waiting days for answers. If something needs a more detailed back-and-forth, we’ll work through it.

How long does the consultancy last?

Until your build is complete. There’s no expiry date. I’m not watching the clock — I’m here to get you through to a finished, working hot tub or pool.

What if my situation is unusual or complicated?

That’s fine — unusual situations are the norm rather than the exception. The whole point of a consultancy rather than a standard plan is that it’s tailored to your specific setup. Send me the details and we’ll work it out.

Do I need to know anything about plumbing before we start?

No. That’s what I’m here for. You share what you have, I design what’s needed and explain it clearly. Plenty of people who’ve used this service had never touched a plumbing fitting before they started their build.

Can I order the parts through you?

Yes. Once the parts list is agreed you can order everything directly through parts4tubs.com (USA) or parts4tubs.co.uk (UK). Everything will be correctly specced for your build so there’s no guesswork at the point of order.