Simple Stock Tank Hot Tub Plumbing Kit – 8 Jets

This Kit Contains

20′ Flexible 2″ Pipe For Lower Drains
25′ Flexible 1″ Pipe For Jets
2 x 90 Degree 2″ Coupler (for drains)
1 x 2″ T Coupler (for drains)
2 x Lower Drain
8 x Jet Body
8 x Jets
16 x End Caps (to cover off air intake if not using a blower (blower not included) )
8 x Jet Gaskets

Price includes Delivery

You will need to provide your own Pipe Cement

Please note, this kit does not include a Stock Tank, filter, heater, blower or pump. 

This is a plumbing kit only.

If you are connecting to a pump, you will need to check the inlet and outlet size. Normally, these are 2″ or 2.5″. You will need a convertor to connect to your 1″ plumbing jet pipes.

This is a DIY Plumbing Kit to help you build your own Stock Tank Hot Tub. Please Note, this kit does not include the stock tank, pump, heater, blower or filter. You will need to add these to your own design. 

This plumbing kit will enable you to add jets and lower drains (you need 2 for safety and to maintain water flow to your pump) to your Stock Tank to begin to turn this into a Hot Tub.

You will need to add a pump to power the jets and also a heat source to heat your water.

Parts will require assembly and some DIY skills. You will need to purchase PVC Pipe Cement from your local pool supplier.

Holes for the jets need to be cut from the stock tank at 65mm or 2.56″ with a suitable hole cutter

Holes for the drains need to be cut from the stock tank at 85mm or 3.35″ with a suitable hole cutter

You can of course contact us if you would like a customized quotation for these parts.